Concrete Resurfacing in Indianapolis
Restore Worn Driveways, Patios, Porches, Walkways and Pool Decks Without Automatically Tearing Out the Existing Concrete
Old concrete does not always need to be completely removed and replaced. When the underlying slab is still structurally suitable, Concrete Indy may be able to repair and resurface it using the SureCrete RESIST Exterior Sand Epoxy System.
This premium exterior concrete resurfacing system creates a durable, textured and slip-resistant finish designed for residential and commercial concrete surfaces.
A New Surface for Existing Concrete
Concrete resurfacing is the process of renewing an existing concrete slab by repairing suitable surface damage and installing a new bonded finish over the prepared concrete.
It can improve the slab’s appearance, traction and resistance to everyday wear without the demolition, hauling and reconstruction involved in complete concrete replacement.
Concrete Indy offers exterior concrete resurfacing using the RESIST Exterior Sand Epoxy System from SureCrete. The system combines a two-component epoxy with a specialty aggregate that is broadcast into the surface.
Once completed and protected with a compatible topcoat, it creates a uniform, high-traction finish suitable for pedestrian areas and properly qualified vehicular surfaces.
Why tear out concrete that may still be suitable for restoration?
Let Concrete Indy inspect the existing slab and determine whether resurfacing or replacement is the better solution.
Why Homeowners Choose Concrete Resurfacing
Restore the appearance and performance of existing concrete with a durable resurfacing system designed for long-term exterior use.
Improve the Appearance of Worn Concrete
Resurfacing covers the old exposed surface with a new textured finish. It can dramatically improve concrete affected by discoloration, surface wear, scaling, repaired pop-outs or an outdated appearance.
Avoid Unnecessary Demolition
When the slab remains structurally suitable, resurfacing may avoid the disruption of breaking apart the existing concrete, loading debris, hauling it away, rebuilding the stone base and pouring an entirely new slab.
Create a Slip-Resistant Surface
Specialty aggregate is integrated into the epoxy system to create a textured, high-traction surface. This can be especially valuable on porches, steps, sidewalks, commercial entrances and pool decks.
Withstand Exterior Exposure
RESIST is designed for exterior use and is intended to resist abrasion, normal moisture exposure, freeze-thaw conditions and deicing chemicals.
Choose From Multiple Colors
The system is available in several natural-looking and decorative aggregate colors, allowing the new surface to complement the home, landscaping, brick, stone or surrounding concrete.
Suitable for Pedestrian and Vehicle Traffic
Different installation configurations are used depending on the application. Pedestrian surfaces generally receive a single aggregate-broadcast system, while driveways and other vehicle areas require a heavier double-broadcast installation.
Concrete Surfaces We Can Resurface
Our exterior concrete resurfacing system is suitable for a wide range of residential and commercial concrete surfaces throughout Central Indiana.
Driveway Resurfacing
Restore the appearance and traction of an older concrete driveway without automatically replacing the entire slab. Driveway applications require a heavier installation designed for vehicle exposure.
Patio Resurfacing
Give an aging patio a cleaner, more consistent finish while adding texture and color to the outdoor living area.
Porch and Step Resurfacing
Transform worn front porches, entry landings and concrete steps with a decorative surface that improves traction and curb appeal.
Sidewalk and Walkway Resurfacing
Renew worn residential or commercial walkways with a uniform surface suitable for regular foot traffic.
Pool Deck Resurfacing
Create a textured finish around a swimming pool where improved traction and visual consistency are important.
Commercial Concrete Resurfacing
RESIST may also be used on qualified storefront entrances, commercial walkways, pedestrian areas, parking structures and other exterior commercial surfaces.
See the RESIST Concrete Resurfacing System in Action
Watch how the RESIST Exterior Sand Epoxy System transforms an existing concrete surface.
The process involves mechanically preparing the slab, repairing qualifying defects, applying the epoxy system, broadcasting the selected aggregate and installing the appropriate protective topcoat.
Professional Exterior Concrete Resurfacing
The RESIST Exterior Sand Epoxy System is designed to renew qualifying concrete surfaces with a durable, decorative and slip-resistant finish.
Every resurfacing project begins with proper surface preparation, followed by repairs where needed, epoxy application, aggregate broadcasting and installation of a compatible protective topcoat.
Video Summary
This video demonstrates how an existing concrete surface is professionally resurfaced using the RESIST Exterior Sand Epoxy System. After evaluating the slab, the concrete is mechanically prepared and repaired where necessary. The epoxy coating is then applied before a specialty aggregate is broadcast across the surface. Finally, a protective topcoat is installed to create a durable, textured and slip-resistant finish designed for long-term exterior performance.
Every project is evaluated individually to determine whether resurfacing or complete concrete replacement is the better long-term solution.
What Is the RESIST Exterior Sand Epoxy System?
RESIST is a professional exterior concrete resurfacing system manufactured by SureCrete. It is not ordinary concrete paint and it is not the same as a thin cosmetic sealer.
The system consists of:
The bonded aggregate gives the finished surface its textured appearance and improved traction.
The system can be installed using different colors and design combinations, including contrasting borders.
The original concrete slab remains underneath the resurfacing system, which is why inspecting and properly preparing the existing concrete is essential.
Important
RESIST is the product system. Concrete resurfacing is the service customers are searching for.
See What Concrete Resurfacing Can Change
Concrete resurfacing can make a dramatic visual difference when an existing slab is structurally suitable but has an unattractive, worn or inconsistent surface.
Concrete Resurfacing Colors
RESIST offers eight principal colorways ranging from natural gray and beige tones to darker and more decorative options.
Core Aggregate Colors
Color Disclaimer
Colors shown on a screen may differ from the finished installation. Aggregate variation, lighting, surrounding materials and the selected topcoat can affect the final appearance. Customers should review physical samples before making a final selection.
Borders, Accents and Custom Color Combinations
Concrete resurfacing does not have to be one solid color. Different aggregate colors can be used to create borders and accents that complement the shape of a driveway, patio or walkway.
Picture-Frame Driveway Borders
Contrasting Walkway Edges
Different Colors on Steps & Landings
Dark Borders Around Lighter Fields
Light Borders Around Dark Driveways
Accent Sections Near Entrances
Coordinated Colors for Patios and Pool Decks
Ask About a Contrasting Border
A second aggregate color can make a resurfaced driveway or patio look more intentional and custom-designed.
Our Concrete Resurfacing Process
Every resurfacing project follows a detailed installation process designed to maximize adhesion, durability and long-term performance.
Inspect the Existing Concrete
Concrete Indy evaluates the slab's condition, movement, drainage, cracks, deterioration, contamination and previous coatings.
Not every slab is a good candidate for resurfacing.
Mechanically Prepare the Surface
The concrete is mechanically ground or shot-blasted to remove weak surface material, coatings, sealers and contamination while creating the surface profile required for proper bonding.
This is not a system that should simply be pressure washed and painted.
Repair Qualifying Cracks and Surface Defects
Cracks, pop-outs, scaling and suitable surface defects are prepared and repaired with products compatible with the resurfacing system.
Repairing a crack does not guarantee it can never return. Movement in the original slab may eventually transfer through the new surface.
Apply the Epoxy Base
The two-component RESIST epoxy is properly measured, mixed and spread over the prepared concrete.
Broadcast the Aggregate
The selected specialty aggregate is broadcast into the wet epoxy to create the textured wearing surface.
Install Additional Layers When Required
Driveways and other vehicular surfaces require a heavier installation than pedestrian surfaces.
The specific system is selected according to the area's intended use.
Apply the Protective Topcoat
After the aggregate surface is ready, a compatible topcoat is installed to protect and enhance the finished system.
Allow the Surface to Cure
The area must remain free of traffic while the system cures.
The manufacturer states that completed surfaces may generally reopen to foot traffic after approximately 12 hours and vehicle traffic after approximately 48 hours, depending on temperature, humidity, selected materials and field conditions.
Important Note
Your project manager will provide the approved return-to-service time for your installation. Do not assume every project will reopen at exactly 12 or 48 hours.
Can My Existing Concrete Be Resurfaced?
Concrete resurfacing works best when the underlying slab remains structurally suitable and the primary concerns are at or near the surface.
Concrete May Be a Good Candidate When:
- The slab is generally stable.
- The concrete has a worn or unattractive surface.
- There is manageable scaling or surface deterioration.
- There are repairable pop-outs or chips.
- The owner wants improved traction or a different appearance.
- Previous coatings can be completely removed.
- Drainage and moisture conditions are suitable.
- The slab is not experiencing severe ongoing movement.
Concrete May Need Replacement When:
- Large sections have settled or heaved.
- There is severe vertical displacement.
- The stone base or subgrade has failed.
- Deterioration extends deeply through the slab.
- The surface is extensively delaminated.
- The concrete has major active structural cracking.
- Water is pushing through or beneath the slab.
- The slope or drainage needs to be reconstructed.
- The slab cannot provide a stable substrate.
Need an Honest Recommendation?
We do not recommend resurfacing every slab. Because Concrete Indy also removes and replaces concrete, we can evaluate both options and recommend the approach that makes the most sense for the condition of your project.
Concrete Resurfacing vs. Concrete Replacement
Every project is different. The right solution depends on the condition of the existing concrete.
| Consideration | Concrete Resurfacing | Concrete Replacement |
|---|---|---|
| Existing Slab | Remains in place | Removed and reconstructed |
| Best For | Structurally suitable concrete with surface or appearance problems | Settled, heaved, deeply deteriorated or structurally failed concrete |
| Demolition | Limited surface preparation and repairs | Full demolition and debris removal |
| Base Correction | Generally not included | Stone base and grading can be reconstructed |
| Appearance | New textured aggregate finish | New concrete with selected finish |
| Cracks | Existing movement may reflect through | New concrete can still crack, but the failed slab is removed |
| Drainage Correction | Limited by existing slab elevations | Elevations and drainage can often be redesigned |
| Project Disruption | Usually less than replacement | More demolition, trucking and reconstruction |
| Final Recommendation | Based on slab inspection | Based on slab inspection |
Choosing the Right Solution Matters
The lowest initial price is not always the best choice. Resurfacing an unsuitable slab can lead to disappointment, while replacing a sound slab may create unnecessary expense. Concrete Indy will inspect the existing concrete before recommending either option.
Built for Traction, Wear and Exterior Exposure
The RESIST system is designed to provide a durable wearing surface for exterior concrete.
Its aggregate texture improves traction, while the epoxy and compatible protective topcoat help the surface withstand normal exterior exposure.
Performance benefits include:
Performance Depends on Proper Installation
These properties depend on proper slab qualification, preparation, installation, curing and maintenance. The RESIST system is designed to resist normal exterior moisture exposure. It should not be described as waterproof.
Commercial Concrete Resurfacing in Indianapolis
RESIST can also provide a textured restoration option for qualified commercial concrete.
Commercial Projects Require Individual Evaluation
Commercial projects require a review of traffic, chemical exposure, slip resistance, shutdown timing, surface condition and maintenance expectations.
Request a Commercial Site Evaluation
Why Choose Concrete Indy for Concrete Resurfacing?
Experience, proper evaluation and quality preparation are essential to a successful concrete resurfacing project.
We Understand the Concrete Beneath the Coating
A resurfacing system is only as dependable as the concrete underneath it. Concrete Indy is a full-service concrete contractor, not simply a coating applicator. We evaluate cracking, settling, drainage, slab deterioration and other conditions before recommending a surface treatment.
Resurfacing and Replacement Options
Some companies only sell coatings. Concrete Indy can evaluate whether your project should be repaired and resurfaced or completely removed and replaced.
Residential and Commercial Experience
Our team works on driveways, patios, sidewalks, steps, sports surfaces, commercial concrete and other exterior flatwork throughout Central Indiana.
Surface Preparation Matters
We understand that professional mechanical preparation, repair and cleaning are essential to the performance of a bonded concrete resurfacing system.
Clear Project Recommendations
We explain what the proposed resurfacing can improve, what it cannot correct and what maintenance the finished surface may require.
Local Central Indiana Contractor
Concrete Indy serves Indianapolis and surrounding communities and understands the freeze-thaw exposure, deicing chemicals and seasonal conditions that affect exterior concrete in Indiana.
Concrete Resurfacing Project Gallery
Browse examples of concrete resurfacing projects, installation stages and finished surfaces. Actual Concrete Indy projects will be added as they become available.
Before & After Driveways
Actual Concrete Indy project photos when available.
Patio Resurfacing
Restore outdoor living spaces with decorative finishes.
Porches & Steps
Improve curb appeal and traction.
Walkways
Uniform finishes for sidewalks and pedestrian areas.
Pool Decks
Slip-resistant decorative resurfacing.
Close-Up Texture
Representative aggregate finish.
Border Combinations
Contrasting colors and custom accents.
Surface Preparation
Mechanical preparation before installation.
Aggregate Broadcast
Broadcasting specialty aggregate into wet epoxy.
Finished Commercial Projects
Representative examples of commercial resurfacing applications.
Representative Example
Manufacturer Example
Manufacturer-provided image. Not a Concrete Indy project.
Concrete Resurfacing Near Indianapolis
Concrete Indy provides concrete resurfacing estimates throughout Indianapolis and Central Indiana. Our team serves homeowners, businesses and property managers across the following communities:
Serving Central Indiana with Meaningful Local Content
We do not create thin duplicate city pages that simply replace the city name. Separate location pages are created only when we have unique local content, project photos, customer reviews and location-specific information.
Concrete Resurfacing Frequently Asked Questions
Find answers to common questions about concrete resurfacing, the RESIST Exterior Sand Epoxy System and whether your existing concrete may qualify for resurfacing.
Find Out Whether Your Concrete Can Be Resurfaced
You may not need to tear out your entire driveway, patio, porch or walkway to improve its appearance. Let Concrete Indy inspect the existing slab and determine whether the RESIST Exterior Sand Epoxy System is the right solution for your project.
